bing tracking image
Q & A Icon

Red Brake Lights on Trailer Flashing Instead of Amber Lights for Hazards Using Tow Ready Converter  

Question:

Hello, i built an adapter with this device. US 7 Plug to EU 13 Plug. Basically it works as intended. But when turning on the emergency lights, the brake lights on the trailer are flashing and not the amber lights. If I only turn on either left or right signal, it works properly. I have a 2019 Ford Explorer platinum.

0

Expert Reply:

The internal circuits on the Tow Ready Vehicle to Vehicle Tail Light Converter # 118158 will send the circuit from the emergency flashers on your Explorer through the stop light wire. This is actually normal operation for the converter and there's not really anything you can do to configure it so that it powers the amber lights instead.

Most US vehicles use the brake light circuit to activate the hazards, so when the circuits are separated by the converter only the brake lights will be powered on the trailer.

expert reply by:
0
Chris R

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.