Is Additional Relay Needed When Installing Curt T-Connector Trailer Harness on 2014 Acura MDX
Question:
In the Q and A you say: If your 2014 Acura MDX did not come with the factory tow package then you would likely need to get the relay from an Acura dealer to install trailer wiring harness # C56192. It is possible though that an auto parts store would have an aftermarket relay. You can check your vehicle owners manual for the relay location to see if it is present on your model. I just ordered this wiring harness and I dont have a tow package. I dont see any reference in my manual about a relay for the tow package. Do you know where I should be looking for this? I see the fuse locations for Trailer Charge, Trailer Back Light, Trailer Hazard, and Trailer E Brake in the rear fuse box, but I dont see any reference to a relay.
asked by: Brad K
Expert Reply:
Even if your 2014 Acura MDX doesn't have the factory tow package, the Curt T-Connector Vehicle Wiring Harness # C56192 and the fuses that come included should be all that you need to provide the Acura with a fully-functional 4-Way connector to power the trailer's signal lights. This is going to plug right into the vehicle's junction box behind the driver's-side tail light and the included fuses will be inserted into the correct slots as indicated in the instructions.
I believe at one point it was thought that an additional relay might be needed for certain models but this should not be the case for your 2014 Acura MDX.
I have attached a full installation video that you can follow along with.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Trailer Wiring Harness Installation - 2016 Acura MDX
- Shop: Trailer Hitch
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2012 Ford Escape
- Video: Trailer Hitch Installation - 2012 Ford Escape
- Shop: Vehicle Tow Bar Wiring
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56192 Review
- Shop: Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Q&A: Is the Dealer Acura Relay Required to Install Trailer Wiring Harness on a 2014 Acura MDX
- Shop: T-One Vehicle Wiring Harness with 7-Way Trailer Connector
- Q&A: What Size Thread Tap Would be Needed to Clean Weldnuts for Installing Curt Hitch 13354
- Q&A: Fitment and Compatibility of Curt Wiring Harness on 2016 Acura MDX
- Q&A: No Signal or Function on Trailer Harness on a 2007 Acura MDX
- Q&A: Why Does 2016 Acura MDX Call for 20 Amp Fuse But For Curt Trailer Wiring 10 Amp Fuse is Recommended
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: trailer wiring
- Q&A: What do the Codes for the Test Lamps Mean on CURT Adapter 4 Pole to 7 Pole and 4 Pole # C57674
- Video: Trailer Wiring Harness Installation - 2015 Acura MDX
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 90160
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
on Custom Fit Vehicle Wiring
