2020 Kia Telluride LX Trailer Hitch and Towing Capacity Recommendation
Question:
Hello I want to make sure I understand about Kia Telluride LX towing capacity and tongue weight. I want to tow a camper dry weight at 3000 pounds with a base dry hitch weight of 420, thats approx 70 lbs over 351. So even with a Curt class 3 hitch wouldnt be able to tow this?
asked by: Sundi
Expert Reply:
We have the Curt Hitch part # C13420 as a confirmed fit for your 2020 Kia Telluride LX which has a 5,000 lb trailer towing capacity and a 750 lb tongue weight capacity which would easily handle the weights of the trailer you mentioned. I also checked and your vehicle has a towing capacity of 5,000 lbs so you'd be safe to tow that trailer with this hitch. I attached an install video for this hitch and an installed picture for you to check out as well.
For trailer wiring you could then use the ZCI kit part # 119250KIT which does not require any splicing as it uses sensors to attach to the vehicle wiring.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
Products Referenced in This Question
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: Replacement Hub for 2013 Wildwood 26TBSS Hub Drum with AL-KO 8700
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can Electric Trailer Brake Kit # AKEBRK-2 be Submerged in Water
- Q&A: Replacement Strut for Stabilus Lift-O-Mat on Dometic Awning
- Q&A: Replacement Fan Recommendation for the MaxxAir 4700K
- Q&A: How to Determine Correct Curt 4-Way Wiring Harness For 2024 Kia Telluride
- Q&A: Replacement Trailer Jack Recommendation for Dutton-Lainson Jack on Ranger Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Rooftop Cargo Carriers
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop