Will the Rhino-Rack # RR576 on My 2010 Volkswagen Jetta Wagon?

Question

Question:

Will it fit on a 2010 Volkswagen Jetta wagon?

asked by: Caleb D

0

Expert Reply:

The Rhino-Rack Ski and Snowboard Carrier part # RR576 will fit crossbars up to 3-3/4" wide x 7/8" tall. In order to make sure these fit your 2010 Volkswagen Jetta Wagon for sure, I recommend measuring your crossbars.

expert reply by: Conner L

0

Answer 1

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

Hey Dominick, Yes, we offer the 58" long Malone AirFlow2 Roof Rack in black with Item #MAL84AR. If you need anything else just let me know and I'd be happy to help.

view full answer...

Answer 5

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 6

The 18.5x8.5-8 is actually an old tire size that is not used much anymore. The closest metric size to your existing tire would be 215/60-8. Your wheel most likely has a 5-on 4-1/4 inch bolt pattern (see link), you will want to make sure that the bolt…

view full answer...

Answer 7

The 1-7/8 inch width is what is rounded up to 2 inches which is a standard width for winch straps. The 14 foot length is not something we carry. I recommend the Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs #DL24239 or…

view full answer...

Answer 8

The Replacement Mounting Hardware part #LC701665 comes with the Extension Rods, Extension Rod Bracket, Torsion Arm Caps, and various hardware. I am not sure what all you have now but it sounds like you might also need the torsion heads, part #LC87FR…

view full answer...

Answer 9

The #37213635 JR Products Replacement Landing Gear Switch you'd mentioned would be a proper replacement for your existing Atwood 70254 landing gear switch. If you wanted the switch, wiring harness and the bezel for the switch, use the Stromberg…

view full answer...

Answer 10

Hey Josh, If your 2017 Ford Escape has a tow package then you'll see a 7-pin round connector around the trailer hitch to plug the Hopkins #30955 in. If you don't have this package/connector then you'll need the Tekonsha T-One Vehicle…

view full answer...

Will the Rhino-Rack # RR576 on My 2010 Volkswagen Jetta Wagon?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching