Locating Replacement Hubs for Hadco 394 Assemblies on 2000 Utility Trailer
Question:
I want to figure out what size wheel hub will my 2000 All Star single axle utlility trailer has
asked by: Dmitry I
Expert Reply:
There is a way to determine the right replacement hubs for your older trailer, but I wasn't able to cross-reference your Hadco assemblies to another model using the 394 stamped onto the hub.
Your best option is going to be to pull one of the hubs and remove the inner and outer bearings. There should hopefully be a number printed right inside the bearings themselves but if not, you can also take a few measurements along the spindle with a digital caliper like # PTW80157 (see attached image).
If you can tell me what numbers you found or what measurements you took I will be happy to locate the right replacement hub.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Bulldog Collar-Lok Coupler w/ Pin - 2" Ball - 3" Channel Tongue - 5,000 lbs
- Search Results: bulldog
- Search Results: m170a
- Search Results: pin
- Search Results: fire extinguisher mount
- Q&A: Replacements For Hadco Trailer Axle With Hadco 3109 Hubs
- Shop: Peterson Piranha LED Clearance or Side Marker Light w/ Reflector - 2 Diodes - Rectangle - Amber Lens
- Shop: Quick Fist 3" Clamp - 2-3/4" to 3-1/4" Inner Diameter - Rubber - 50 lbs
- Shop: Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diode - Oval - Red Lens
- Shop: etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1,000 lbs
- Search Results: hadco
- Search Results: bearing kit
- Search Results: 168255tb
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Grease Seals 10-36 (pair)
- Q&A: Replacement Hub with Inner Bearing LM48548 and Outer Bearing L44649
- Q&A: Lug Nut Torque Spec for a 1/2 Stud with Coned Lugs on a 15 in Steel Wheel
- Q&A: Replacement Drop Axle for Trailer with Square axle and Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Recommendation for Installation of a Brake Mounting Flange on a Trailer Spindle and Axle
- Q&A: Possible Replacement Grease Seal for Hadco 3122
- Q&A: Where does a Brake Flange need to be Welded on a Spindle
- Shop: Brake Controller
- Video: Trailer Brake Controller Installation - 2011 GMC Sierra 90195