Vented Battery Box For That Fits 4-6 Volt Batteries

Question

Question:

I have a 2015 grand design solitude travler the battries are inside the front and need to be vented. I want to put 4- 6 volt battries in it what would be the best boxes to use.

asked by: Randy G

0

Expert Reply:

The only box that would be large enough to fit 4-6 volt batteries in is the TorkLift PowerArmor Locking Battery Box - 6V and 12V Batteries part # TLA7710R it measures 58-1/2" long x 7-5/8" wide x 12-3/4" tall. The bottom of the boxes is vented for air circulation.

expert reply by: Heather A

0

Answer 1

I do have thoughts, and while we do have battery boxes that will allow you to mount four 6 volt batteries, you simply do not have enough room inside your A-frame at the front to store that many batteries. Instead, you will need to mount them on top…

view full answer...

Answer 2

The internal dimensions of the NOCO Commercial Grade Battery Box #329-HM426 are 14-5/8" long x 10-1/2" wide x 11-1/2" tall. The dimensions of the Trojan T-105 batteries are 10.30 inches wide, 7.11 inches deep, and 11.07 inches tall…

view full answer...

Answer 3

I recommend using the Tow-Rax Battery Box #329-HM426 for your upgraded 6V Trojan batteries. This box has internal dimensions of 11-25/32" long, 8-27/64" wide, and 10-15/16" tall which should be more than enough space to fit one…

view full answer...

Answer 4

If you intend to wire the two batteries together they should be the same type but if you want to add a second independent battery for the winch/lights/stereo it can be a different type and/or have a different amp-hour (Ah) rating. A separate system…

view full answer...

Answer 5

The TorkLift PowerArmor Locking Battery Box #TLA7710R has dimensions of 58-1/2" long x 7-5/8" wide x 12-3/4" tall so the four six volt batteries you have should be able to fit in the box with room for another one. This same battery box…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 8

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Vented Battery Box For That Fits 4-6 Volt Batteries

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching