How To Reset Jensen JWM60A With Error Display

Question

Question:

You say that there is no transport screw. It will not play cds or dvds. It keeps coming up disk err. What can I do to fix the problem. Take it back to the dealership?

asked by: James W

0

Expert Reply:

If you are getting an error when trying to play discs, the Jensen stereo part # JWM60A can be reset and that usually fixes the issue. Use a ball point pen or similar object to press the RESET button (28). This may be
necessary should the unit display an error code.

It may be possible your unit has a transport screw still installed. You may want to take a look at the back of the unit there should be a sticker that tells you it needs to be removed.

expert reply by: Heather A

0

Answer 1

The Jensen Stereo #JWM60A most likely needs to be reset. The connections you mentioned are most likely causing issue if I understand correctly because you will only be able to use one input signal at any given time. If you are using the USB input,…

view full answer...

Answer 2

According to Jensen, resetting the stereo should fix your problem. Just to the right of the CD/DVD eject button is a small hole. If you straighten out a paper clip and push it in that hole, there's a small reset button. Press the button and the…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

It is really not a great idea to drive with a trailer cover like the part #052963735635 installed on a trailer. The only way I could safely recommend you do so is if you were to keep the speeds under 25 miles per hour and you weren't on a public…

view full answer...

Answer 5

Actually on brake magnets for trailers either wire can be used as the power or the ground so the colors don't really mean anything. Most likely the magnet manufacturer just put what ever color was most convenient on your trailer.

view full answer...

Answer 6

Brake magnets are made to fit their specific brake assemblies. They are not made to be interchangeable between brake sizes or weight capacities. Some manufacturers do use different color magnet wires that correspond to the capacity. We know that…

view full answer...

Answer 7

I would check the magnets for wear before going on to test them with a meter. If the magnets show abnormal wear or if you can see the windings beginning to show through the friction surface of the magnet then they will need to be replaced. To further…

view full answer...

Answer 8

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 9

There are and were numerous 2-step Kwikee electric steps available. To ensure we get you the correct replacement I would need to know the series of the steps you have. Check the underside of your steps for any model numbers or other information. The…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 12

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

How To Reset Jensen JWM60A With Error Display

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching