Will the Thule Insta-Gater Pro Bike Rack Work With a 2012 Trek Madone 6.2 H2

Question

Question:

Will the Thule insta gator pro work on a 2012 Trek Madone 6.2 H2 fit? Im just not sure of the clearance between the wheel and down tube.

asked by: Robert V

0

Expert Reply:

I spoke with my contact at Thule and the diameter of the locking arm bar on the Thule Insta-Gater Pro Bike Rack, # TH93VR, is 1-1/4 inches. The bar itself has a 1 inch diameter and the foam padding adds 1/4 of an inch to that diameter.

As long as the distance between your tire and down tube is 1-1/4 inches this bike rack will work with your 2012 Trek Madone 6.2 H2.

expert reply by: John H

0

Answer 1

Although a mountain bike with a wide tire is shown in the product description photos, the Thule Insta-Gater will work great with your road bike. The foam padded locking bar with ratcheting action will tightly grip your bike wheel, keeping your bike…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 4

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Answer 8

Most critical to trailer tire performance and durability are 1) proper inflation 2) observance of the tire's rated load capacity and 3) observance of the tire's speed rating. If either of these factors is off the mark then the tire will tend…

view full answer...

Answer 9

I wish I could say yes, but as of right now they are not a fit for the 2016 models and we do not have any other suspension enhancement options. If you are trying to fight suspension sag from the tongue weight of a trailer there is a better option. A…

view full answer...

Answer 10

I'm pretty sure you are correct that the Coil SumoSprings Custom Helper Springs #CSS-1145R will fit your 2018 Toyota Highlander, however, we haven't had the chance to test this out and SuperSprings doesn't have this listed in their…

view full answer...

Answer 11

The answer to your question depends on where the hitch sits on the Bronco and how far the tire sticks out. This is not information that we have so you will have to use our measurements to compare on your Bronco. The distance from the center of the…

view full answer...

Will the Thule Insta-Gater Pro Bike Rack Work With a 2012 Trek Madone 6.2 H2

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching