Dimensions of Mounting Holes of Motorcycle Wheel Chock # TWSPWM
Question:
I need the measurements of the wheel chock holes. Im trying to match existing holes.
asked by: Brian W
Expert Reply:
There are 3 holes in the mounting surface of this wheel chock. One is
in the center of the strap at the front of the chock and the other two
are in the back strap. The front to back measurements are as follows,
from the center of the front mounting hole straight down to the centers
of the back 2 mounting holes is 7 inches. If you measure on the
diagonal line from the center of the front mounting hole to the back
mounting hole on both sides the measurement is 7-1/4 inches. The 2 rear
mounting holes are 5-1/2 inches on center.
You can see these dimensions on the photo I have edited for you.
Product Page this Question was Asked From
Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2" Wide Tires - Tubular Steel - Black
- Wheel Chocks
- Wheel Chock
- Motorcycle
- Steel
- Single Chock
- Black
- Tow-Rax
more information >
Continue Researching
- Shop: Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2" Wide Tires - Tubular Steel - Black
- Search Results: motorcycle wheel chocks
- Shop: Tow-Rax Removable Wheel Chock w/ Hardware - 6-1/2" Wide Tires - Tubular Steel - Chrome
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: 7 to 4 connector
- Search Results: trailer tie down
- Video: Loading Ramp Set Review
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Pollak 7 Pole to 4 Way Connector Adapter
- Shop: Rack'Em Manufacturing Removable Wheel Chock
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Erickson Removable Motorcycle Wheel Chock - 6" Wide Tires - Chrome Plated Steel - Qty 1
- Video: Tow-Rax Removable Wheel Chock Review TWSPWC
- Video: Tow-Rax Wheel Chocks - Wheel Chock - TWSPWM Review
- Search Results: stake pocket d ring
- Q&A: Will Tow-Rax Mounting Hardware For Wheel Chock Withstand The Weight Of A Harley
- Q&A: Can Motorcycle Wheel Chock Be Installed in Trailer Floor with Mesh Floor
- Q&A: Recommendation for a Removable Wheel Chock
- Search Results: winch mounts for trailer
- Q&A: Is There an Option to Lower the Trailer Hitch Receiver for Motorcycle Carrier Use?
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Article: Trailer Wiring Diagrams
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)