What Thule Roof Rack Components Fit 2019 Toyota Highlander with Naked Roof

Question

Question:

Will my thule aero crossbars work on RCH legs? i have 2019 highlander le with no existing rails

asked by: Tom

0

Expert Reply:

The Thule and Rhino Rack roof rack components cannot mix. So what you would need to install your Thule aero shaped crossbars on the roof of your 2019 Toyota Highlander that has a naked roof is the foot pack part # TH480R and the fit kit part # THKIT1803 and you'd be set. Normally you'd also use their 60 inch load bar part # TH711520 as well.

expert reply by: Jameson C

0

Answer 1

I have a perfect solution for you. For your 2017 Toyota Highlander, I recommend looking at the Rhino-Rack RSP Roof Rack #RRRVP37. This system is confirmed to fit the naked roof on your vehicle and will attach using the OEM fixed mounting points on…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 5

To prevent stripping the best advice I can give is to apply as much vertical pressure as you can with the tool of the Rhino-Rack Pioneer Platform Rack #RR76QX to the screws so that they engage properly and can be rotated without stripping.

view full answer...

Answer 6

The steps listed to transition into neutral tow mode in the online owner's manual for a 2021 Jeep Wrangler are as follows: 1. Bring the vehicle to a complete stop on level ground. 2. Press and hold the brake pedal. 3. Shift the automatic…

view full answer...

Answer 7

The RCH Legs #RRRCH4 (RCH4) are the correct legs for your 2022 Toyota RAV4 with flush rails, you will also need the Custom RCP Fit Kit #RR42SV to mount them to the fixed mounting points. The Rhino-Rack Pioneer Platform Roof Tray #RR35TB (60"…

view full answer...

Answer 8

I recommend installing the Thule WingBar Evo roof rack on your 2023 Toyota Highlander with the clean/naked roof. I prefer to use the Thule as they utilize a channel mount in which you do not have to cut the rubber strips to use channel mounted…

view full answer...

Answer 9

It looks like you have the Malone AirFlow2 Roof Rack #MPG215 on your 2022 Toyota 4Runner. The correct replacement towers/crossbar mounts are the Replacement Towers for Malone AirFlow2 Roof Rack Crossbars #MAL64VR. The Replacement Towers for Malone…

view full answer...

Answer 10

Thank you for the information! It sounds like your 2020 Toyota 4Runner TRD Pro has the raised rails and OEM crossbar setup that we'd find on the standard 2020 Toyota 4Runner. This has very low clearance under the factory crossbars so it's…

view full answer...

Answer 11

Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part #RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a…

view full answer...

What Thule Roof Rack Components Fit 2019 Toyota Highlander with Naked Roof

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching