Bolt and Bolt Hole Dimensions on the Bulldog Round Snap-Ring Swivel Jack
Question:
For Bulldog p/n BD151443, your staff provided a picture with the mounting hole spacing. I wanted to confirm that those are center-to-center measurements? Could I get the measurement between the holes? And what is the bolt size diameter which is supplied with this jack? Thank you very much!
asked by: Kian
Expert Reply:
The image you referenced from our question and answer section does provide the dimensions from bolt hole center to bolt hole center. I went out to the warehouse and took additional measurements of the Bulldog Round, Snap-Ring Swivel Jack, # BD151443, for you.
The dimensions between the inner edges of the bolts holes on this jack are 5 inches by either 3-15/16 inches or 2-15/16 inches. The diameter of the bolts used for this jack are about 11/32 of an inch. I have included an additional image showing these dimensions
This jack fits up to 3 inch by 4 inch tongues. This jack does not include a footplate or wheel, but I would recommend the Bulldog Detachable Footplate, # BD018564. We also offer the Bulldog Removable Wheel, # BD500245, but a wheel will reduce the overall capacity of this jack to 1,200 lbs.
Products Referenced in This Question
Replacement Square Footplate for Bulldog Round Trailer Jacks w/2" Diameter Tubes - 2" Tall
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Foot
- 2 Inch Diameter Tubing
- Bulldog
more information >
Replacement 6" Caster Wheel for Bulldog Trailer Jack with 2" Tube Diameter - Qty 1
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Wheel
- 6 Inch Wheel
- Wheel w Caster Assembly
- Bulldog
more information >
Product Page this Question was Asked From
Bulldog Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Swivel Jack
- Topwind Jack
- 10 Inch Lift
- Bolt-On
- No Wheel or Foot
- Bulldog
more information >
Continue Researching
- Video: Review of Andersen Wheel Chocks - Rapid Jack - AM3620
- Q&A: Will the RV Bumper Hitches Work On a 3" x 3" Bumper/Frame
- Shop: Andersen Tuff Chock
- Video: Bulldog Trailer Jack - Side Frame Mount Jack - BD151443 Review
- Shop: Bulldog Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs
- Video: Review of JR Products RV Door Parts - 100 lb Force 26.3 Inch Entry Door Gas Shock - 372-2600-100
- Shop: Stromberg Carlson 2" Motor Home Hitch Receiver for RV Bumpers - 200 lbs
- Shop: Andersen Rapid Jack
- Shop: Thule RV Wheel Levelers - Black - Qty 2
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide
- Shop: Gas Shock - 100 lb Force - 26.3" Extended, 15.30" Compressed - Black Nitride
- Video: Bulldog Round Snap-Ring Swivel Jack Review
- Search Results: fulton f2
- Video: Easy Swivel Trailer Jack Installation
- Video: etrailer Trailer Jack - Side Frame Mount Jack - MJ-1500B Review
- Video: Fulton Round Snap-Ring Swivel Marine Jack Review
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Solution for Squeaky/Noisy Trailer Suspension with Equa-Flex Equalizers
- Search Results: 68149
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Shop: Fifth Wheel Hitch
- Search Results: 25580
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Shop: Brake Controller