How to Set The Clock On The Jensen RV Stereo JWM60A

Question:

I can not get the clock to set, I have tried pushing and holding the hour and minute buttons but nothing changes

asked by: Cliff R

Expert Reply:

I am happy to help you set the clock on your Jensen Stereo part # JWM60A. If you press and hold the hour and minute button then numbers representing the hour and minutes should flash. If you see a flash then you know the stereo is in clock set up mode. You should be able to press the hour button and the minute button to adjust the time once the stereo has entered that mode (after you see the numbers flash). If you stop adjusting the hour and minute numbers and wait five seconds, the new time will save.

expert reply by: Heather A

click to enlarge

Peggy L.

11/8/2021

I cannot get to the time menu to reset my clock

Les D.

11/11/2021

@PeggyL To change the time on the clock, page 8 of the user guide says, Press and hold the clock HOUR or MINUTE button (39, 36) to access clock setup mode. The number representing the hours and minutes will flash. Press the HOUR button (39) to adjust the hour and press the MINUTE button (36) to adjust minutes. The new time will be saved five seconds after the last adjustment is made. If this fails, you can try a factory reset by pressing and holding the Enter knob.

Alexander R.

6/12/2020

You first need to make sure your radio is on. That's what gave me trouble, I didn't have it turned on and nothing would change so make sure your radio is on first.

Loren

4/2/2022

This is the BEST answer!!!! Just because the screen is lit up that doesn't mean you can adjust the time. TURN THE RADIO ON!!! That works. Thanks Alex.