Visibility of the Curt Trailer Hitch C13119 on a 2012 Honda CR-V

Question

Question:

do you have a photo of this hitch installed on a 2012 CRV? I would like to see how much of the hitch is exposed.

asked by: Ken

0

Expert Reply:

We do have a photo of the Curt Hitch, part # C13119, on a 2012 Honda CR-V and I have posted it on the page. The most visible part will be the receiver opening and the front of the round crossbar. I have also linked the installation detail for this hitch.

expert reply by: John H

0

click to enlarge

Answer 1

For your 2014 Honda CR-V I highly recommend the Curt Class III Trailer Hitch Receiver #C13119 for a couple of reasons. All of the Class III custom hitches (I recommend going with a Class III not only for the extra capacity but for the larger 2"…

view full answer...

Answer 2

The drivers side bolts will not bolt through the appearance panel. There will be an 8-1/2 inch by 4-1/4 inch cutout in the appearance panel for the drivers side bolts. This cutout will give you enough room to bolt the hitch on and leave the…

view full answer...

Answer 3

BMWs and Hondas are very different vehicles so you would need a different hitch for the 2013 Honda CR-V to carry your Thule bike rack. You would want the Draw Tite Hitch part #75742 as this is a 2 inch hitch confirmed to fit your vehicle that would…

view full answer...

Answer 4

I'm not sure which year your Honda CR-V is but I saw you looked at the trailer hitch receiver that fits the CR-V from 2012 to 2016 so I checked a manual for the 2016 model. It states, on page 353, that the maximum towing capacity is 1,500 pounds…

view full answer...

Answer 5

To trim the underbody panel on your 2013 Honda CR-V for the installation of a Curt Trailer Hitch Receiver #C13119, I recommend marking the area that needs to be cut to start with. I have provided a graphic showing where this section is and the…

view full answer...

Answer 6

The problem you are experiencing is pretty common for vehicles that have seen a couple winters. What happens is the weld nuts get a bit of corrosion in them and that prevents the bolts from being able to thread. This makes it seem like the nuts are…

view full answer...

Answer 7

The recommended strap connection point for the Curt Support Strap, part #18050, is at the bottom of your tailgate on your 2012 Honda CR-V. You can simply wrap the strap around your bike rack then insert the hook facing up into the bottom lip of the…

view full answer...

Answer 8

For the price you can't beat the Curt hitch part #C13119 for your 2015 Honda CR-V. This hitch would work well for you. You may have trailer wiring on your vehicle, but if not you would want the part #C56158. Since you wanted to do some towing you…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Visibility of the Curt Trailer Hitch C13119 on a 2012 Honda CR-V

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching