Difference Between Fan-Tastic Trailer Roof Vent Covers

Question

Question:

1. Whats the difference between the 1400 and the 1600 models? 2. Will the cover interfere with automated opener fantastic fan units?

asked by: Rusty K

1

Helpful Expert Reply:

I believe you were referencing the Fan-Tastic Trailer Roof Vent Covers, though there isn't a 1600 model I was able to reference. There are 1500 models, though.

The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1500WH (White) or # DMC38FR (Black) fit all Fan-Tastic Vent trailer roof vents.

And to answer your second question, these covers will not interfere with the automated opening. They are designed so they will work perfectly with your automated vent opening.

expert reply by: Kyle S

1

Answer 1

The Lippert 2" Trailer Hitch Receiver part #LC730647 is specific to Vanleigh 5th Wheel Trailers. If you take a look at the attached photo you will see that there are tabs on this trailer that sit below the frame and the trailer hitch attaches to…

view full answer...

Answer 2

The correct replacement Roof Vent Cover would likely be the Fan-Tastic #FVU1500BL for black, but you'll want to check the model number of the existing vent. If the number ends with 'DF', this would be the correct tit that would attach to…

view full answer...

Answer 3

Yes. The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover #DMC38FR is designed specifically to fit ALL Fan-tastic Vent trailer roof vents, so you won't have any issues with fitment. This does sit on the top of raised brackets that are…

view full answer...

Answer 4

Yes absolutely! Those 4 plastic tabs are actually integrated mounting points specifically made for mounting the: -Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover #DMC38FR. So with that being said, this cover will work great for you!

view full answer...

Answer 5

For your Fan-Tastic Vents you'll need the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover #DMC38FR. These covers are specifically designed for Fan-Tastic vents and will use the same screws that your vent uses to mount to the roof of your…

view full answer...

Answer 6

I spoke with Lippert about the Trailer Hitch Receiver for Vanleigh 5th Wheel Trailers part #LC730647 and they said this would work on your 2018 Vanleigh Vilano if the distance between your two frame rails inside to inside is 72". If this…

view full answer...

Answer 7

Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.

view full answer...

Answer 8

The DeeMaxx item #DE86VR won't because of the spacing on the mounting bracket but I have a caliper that will. To replace your Tie Down Engineering 46304 caliper you will need the Kodiak Disc Brake Caliper item #KDBC225DAC.

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

For a replacement you need the Titan Zinc-Plated Brake Actuator #T2477600. This is the Titan Model 10 which is the same as the Dexter DX12.5 you currently have on your boat trailer.

view full answer...

Difference Between Fan-Tastic Trailer Roof Vent Covers

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching