Replacement Left Side Ratchet Winch for Demco SS Kar Kaddy Tow Dolly

Question

Question:

Will the kar kaddy 3 fit on the kar kaddy ss?

asked by: Rebecca

0

Expert Reply:

Yes, the Replacement Left Side Ratchet Winch # DM5432 that you referenced is also the correct replacement part for your Demco Kar Kaddy SS model Tow Dolly. If you need the right side assembly as well you will use part # DM5433.

expert reply by: Chris R

0

Answer 1

In order to get the hitch ball down to the height you are looking for to use your Demco Kar Kaddy SS #DM9713045 you are going to need a ball mount with an 8" drop. I recommend the Curt Ball Mount for 2" Hitches - 7" Rise, 8" Drop…

view full answer...

Answer 2

I believe the metal part you are referencing is the metal part that is already attached to the Replacement Fender Assembly for Demco Kar Kaddy SS Tow Dolly - Left Side part #DM5982 I have attached a picture for you to look at from the web page…

view full answer...

Answer 3

I apologize for any confusion, but the correct passenger side replacement for a Demco Kar Kaddy SS is the part #DR74FR for the passenger side. This has the LED light on the front of the fender like you mentioned.

view full answer...

Answer 4

We offer correct replacement wheels for the Demco Kar Kaddy SS tow dolly so you do not need to worry about compatibility of an alternate part. Another wheel will not have the same +42mm offset that these correct wheels have. The replacement wheel has…

view full answer...

Answer 5

A higher load range tire has a higher ply rating but it will also produce a rougher ride and could have a psi rating that exceeds the capacity of the wheel or, more likely, the valve stem. The size you have now, 225/75-15 load range C, is rated for…

view full answer...

Answer 6

Thanks for the pictures! We do have a different style ratchet option for your older tow dolly but you will need to measure the size of the bracket on your current ratchet. The most likely option we have is the Replacement Left Side Ratchet Winch…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Replacement Left Side Ratchet Winch for Demco SS Kar Kaddy Tow Dolly

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching