Dimensions Of Curt Weight Distribution Shank C17132
Question:
I have a 2018 ram 2500 with the Reese steady flex system, I have pulled my camper with the 2” reducing sleeve and I’m not thrilled with the slop in the hitch. I would like to know the measurement from the pin hole to the front of the shank on the curt c17132 so I can make sure I can open my tailgate with the trailer hooked up.
asked by: Jake S
Expert Reply:
I went to the warehouse and measured the Curt Weight Distribution Shank for 2-1/2" Hitches # C17132 and it measures 9" from the center of the hitch pin hole to the end of the vertical portion of the shank. I have attached a diagram with some other measurements I took as well that may be helpful.
Product Page this Question was Asked From
Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 10 Inch Drop
- Trunnion - 9 Inch Drop
- Round - 13 Inch Rise
- Trunnion - 13 Inch Rise
- CURT
more information >
Continue Researching
- Shop: Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Shop: Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch - 12" Drop
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitch - 9" Long - 9 Hole Adjustment
- Shop: Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Q&A: Hitch Pin Hole Measurement Of Curt Weight Distribution Shank C17132
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop
- Shop: Trailer Hitch
- Article: How to Measure for Trailer Hitch Drop
- Video: Fastway Hitch Adapters - Hitch Reducer - DTADP25-SS Review
- Video: Review of Reese - Weight Distribution - RP58369
- Video: Review of Durabilt Trailer Safety Chains - Hammerlock Coupling Links - DU55QR
- Video: B and W Hitch Adapters - Hitch Reducer - BWRHXA2182 Review
- Q&A: 2-1/2 Inch Weight Distribution Shank With 9 Inch Hole to Hole Length
- Search Results: sleeve hitch
- Search Results: 63971
- Search Results: durabilt
- Search Results: 21507
- Search Results: 58167
- Q&A: Dimensions Of Equal-i-zer Weight Distribution Shanks For 2-1/2 Inch Receivers
- Search Results: eq34fr
- Search Results: 90~02~4225
- Q&A: Diagram with Dimensions for Curt Weight Distribution Shank C17132
- Video: Review of Equal-i-zer Weight Distribution Hitch - EQ90-02-4900
- Q&A: Lift Spacers for Firestone Air Bags on a 2007 Dodge Ram 2500 with 6 Inch Lift
- Shop: Fifth Wheel Hitch
- Video: Curt Weight Distribution C17314 Review
- Q&A: Weight Distribution Shank for EAZ System Used in 2020 Ram 2500 Hitch
- Q&A: Recommended 2-1/2 Inch Weight Distribution Shank for 1400 lb Equal-I-zer Weight Distribution System
Gary A.
5/11/2020
I need a weight distribution shank for a 2.5 inch receiver. I need the total length of the shank to be 16'' from top of the receiver to bottom of the drop. I am using a blue ox sway pro. The curt c17132 does not give me quite enough drop and the curt c17125 drops too much. Does curt, or anybody else make a shank in between these 2? Thank you much.