Air Lift Air Suspension Kit Recommendation for 2009 Four Winds Hurricane Motorhome

Question

Question:

Do you recommend any thing for the front of motorhome four winds hurricane 2009?

asked by: Chester D

1

Helpful Expert Reply:

For an Air Lift air bag suspension enhancement kit that fits your 2009 Four Winds Hurricane we have the Air Lift kit part # AL88140 as a confirmed fit which will work great. This is currently only fit option as well.

expert reply by: Jameson C

1

Answer 1

Yes, you can use the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED69FR and the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Dodge item #3020-S to install the Redarc Tow-Pro Liberty Brake…

view full answer...

Answer 2

The etrailer Enclosed Trailer Transition Plate #e32JR is the only transition plate we carry and it does have a working load limit of 1,000 lbs. We have tested this transition plate extensively, and have found that it holds up well, even when loading…

view full answer...

Answer 3

The Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK5-RSSA is the correct steering stabilizer for your 2007 Chevy Kodiak C5500.

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 10

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Air Lift Air Suspension Kit Recommendation for 2009 Four Winds Hurricane Motorhome

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching