BTU and SCFH Rating for MB Sturgis Propane Pigtail # 100833-12

Question

Question:

Your literature states 450,000 btu per hour and your video for the same product states 200,000 btu per hour maximum flow rate. Which is the correct spec?

asked by: Martin N

0

Expert Reply:

The MB Sturgis Propane Pigtail # 100833-12 that you referenced is rated for 450,000 BTU and 200,000 SCFH (standard cubic feet per hour). I apologize for any confusion on that.

expert reply by: Jameson C

0

Answer 1

There are differences that the colors reference for the Type 1 Propane connectors based on the spring tension and flow rate. The light green connectors are rated for Rated for 200,000 Btu per hour. The black are rated for 70,000-100,000 Btu per hour.…

view full answer...

Answer 2

Searching by part number it appears the MB Sturgis Propane Hose Assembly #100383-48-MBS would be the replacemement part you need for at least the 18CE Cavagna Group replacement. The picture received on our end was a duplicate and you mention…

view full answer...

Answer 3

It sounds like you're looking for a Type 1 propane pigtail, which are available in 12" with part #100833-12, 18" with part #37207-30735 or 30" with part #100575-30-MBS; these all have the dark green Type 1 connection that…

view full answer...

Answer 4

I think the MB Sturgis Propane Pigtail, #100833-12 is what is needed. You do not state what fittings you have on current hose but most likely are the Type 1 cylinder connection with a 1/4" Male inverted flare. If you have something different…

view full answer...

Answer 5

The prep package you are referring to is a two tank system with an extra tank that can be swapped in when one of the other tanks is empty. All you need for this to work is the Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator,…

view full answer...

Answer 6

The difference between the Camco Propane Fitting - 200,000 Btu/hr - Green #CAM59923 and the Camco Propane Fitting - 70,000 Btu/hr - Black #CAM59933 is the Btu/hr rating. Based on my research, the Btu/hr needed is determined by the component(s) using…

view full answer...

Answer 7

The correct replacement converter section for your 90 amp 4500 series Progressive Dynamics panel that is compatible with Lithium batteries is the part #PD4590CSV.

view full answer...

Answer 8

Yes. You can replace the Progressive Dynamics PD4590K18NS2 with the Replacement Converter Section for Progressive Dynamics 4500 Series RV Power Control Center - 90 Amp #PD4590CSV without any issues. Both are 90 amp converters from the same Series and…

view full answer...

Answer 9

I don't have a fool proof way of selecting the proper charge converter amperage rating because it is not based solely off the battery capacity but rather this combined with the load the trailer uses. Therefore, the best option would be to go with…

view full answer...

Answer 10

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.

view full answer...

BTU and SCFH Rating for MB Sturgis Propane Pigtail # 100833-12

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching