Can BoatBuckle Boat Winch Strap # IMF05848 be Used on 3,650 lb Boat
Question:
Im confused, in the notes section it says, item being towed must not exceed the WLL of the strap being used. Then it goes and says the WLL is always 1/3 of the maximum load. This strap has a WLL of 1333lbs, my boat weighs 3650lbs without the trailer so my boat exceeds the WLL of the strap but is is about 1/3 of the maximum load, I have wooden bunker boards and use ramps with varying degrees on decline. Is this the strap i should use or is there another better suited for my conditions, thanks in advance
asked by: Mike
Expert Reply:
What's interesting also about straps that secure boats to trailers is that in the event you need the strap the boat would be pulling on the strap which would then only need the capacity to lift the weight of the trailer since the boat is attached to the trailer...
So long story short the BoatBuckle Boat Winch Strap # IMF05848 that has a break strength of 4,000 lbs would easily work well on your boat that weighs 3,650 lbs.
Product Page this Question was Asked From
BoatBuckle Boat Winch Strap with Hook and Safety Latch - Loop End - 2" x 20' - 1,333 lbs
- Accessories and Parts
- Trailer Winch
- Cables and Straps
- 2 Inch Wide
- 1333 lbs
- Straps
- 20 Feet Long
- BoatBuckle
more information >
Continue Researching
- Video: Kenda Tires and Wheels - Tire with Wheel - AM31202 Review
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Shop: Fulton Heavy-Duty Winch Strap with Hook - 20' x 2" - 4,000 lbs
- Shop: BoatBuckle Winch Strap with Hook and Safety Latch - Loop End - 2" x 15' - 1,333 lbs - Qty 1
- Shop: BoatBuckle Boat Winch Strap with Hook and Safety Latch - Loop End - 2" x 20' - 1,333 lbs
- Shop: BoatBuckle Boat Winch Strap with Hook and Safety Latch - Loop End - 2" x 25' - 2,667 lbs
- Shop: Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 5,000 lbs
- Shop: Dutton-Lainson Hand Winch - Single Speed - Freewheel - 20' Strap - 1,500 lbs
- Shop: BoatBuckle Winch Strap with Hook and Safety Latch - Tail End - 2" x 15' - 1,333 lbs - Qty 1
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Search Results: 44649
- Search Results: 68149
- Video: Lippert Solera Slider Slide-Topper Review
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Search Results: 25580
- Shop: Fifth Wheel Hitch
- Video: etrailer Class III Trailer Hitch Installation - 2016 Jeep Cherokee
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: dust caps
- Video: Choosing the Right Brake Controller
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle