Recommendation to Replace 4.80-12 Trailer Tires
Question:
i have a tear camper that is built on a harbor freight 4x8 trailer. it has 4.80-12 tires with four lug pattern. i need to replace the tires with new ones. the whole rig weighs around 800 pounds and will be pulled behind a toyota matrix car. i am about to travel 6,000 miles with it. should i buy 4 ply or 6 ply? or what is reccamended tire? thanks.
asked by: Charlotte U
Expert Reply:
To replace the 4.80-12 size tires on your tear camper I highly recommend the Taskmaster # TT48012C. This is a radial 6 ply tire which means it's going to run a lot cooler on the highway compared to bias alternatives, making it a great choice before you take off on the extended road trip you mentioned. It features a maximum load of 990 pounds at 90 psi and an excellent speed rating of 81 mph (most trailer tires have a 65 mph rating).
I have attached a short video review that you can check out as well.
Product Page this Question was Asked From
Taskmaster 4.80R12 Radial Trailer Tire - Load Range C
- Trailer Tires and Wheels
- Tire Only
- Radial Tire
- Load Range C
- 4.80-12
- 12 Inch
- M - 81 mph
- Taskmaster
more information >
Continue Researching
- Search Results: l44649
- Search Results: carlisle
- Search Results: 4.8 x 12 trailer tires
- Shop: Taskmaster 4.80R12 Radial Trailer Tire - Load Range C
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
- Q&A: 4.80-12 Trailer Tire with 81 MPH Speed Rating
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range B
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Grease Seal
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Q&A: Recommended Hub Assembly for a Trailer w/ L44549 Bearings
- Q&A: BTR Spindle to Fit Trailer Idler Hub for 2,000 Pound Axles
- Q&A: Is AxleTek Idler Hub Available Without The Race
- Q&A: Replacement 4-1/4 Long Idler Hub with 1 Bearings and 1.5 Grease Seal
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-1K
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed