Replacement Trailer Axle With 89 Inch Hub Flange To Hub Flange Measurement
Question:
have a bent axle 80inch from leaf center to center 89inch axle hub flange to axle hub flange with 5 lug rims which measure 3.25inch from center of stud to center of stud and I cant seem to find a replacement on your wed site, can you help
asked by: Keith W
Expert Reply:
In order to replace your trailer axle you can use the Dexter Trailer Axle Beam with EZ-Lube Spindles part # T3584F-EZ-8974 for a 3,500 lb capacity, part # 8327820 for a 5,200 lb weight capacity, or part # 8327830 for a 6,000 lb weight capacity. These axles all have the correct hub face measurement but you will need to have the spring seats moved to match that of those on your trailer.
Based on the measurements that you provided of your stud centers, you have a 5 on 5-1/2" bolt pattern. Although we do not offer the above axles with a trailer hub that has a 5 on 5-1/2" bolt pattern, we do have what you need to add one I would just need you to first confirm what axle capacity you will be using and whether or not it has brakes.
Products Referenced in This Question
Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 5200 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 6000 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Q&A: Installation Information for the Replacement Cables for Enclosed Trailer Ramp Spring # ERS160D96
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Article: What To Look For When Buying Ratchet Straps
- Q&A: How To Determine Blue Ox Spring Bar Weight Capacity
- Article: Trailer Wiring Diagrams
- Q&A: How to Wire Two 6-Volt Batteries In Series to Double Output Voltage
- Q&A: What Type of Fluid to Use in Lippert Hydraulic Leveling Systems
- Q&A: Finding A Replacement Electric Winch For 2007 Rockwood Popup Camper
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
Steven
8/2/2020
I have a dexter axle with this number on the tag, 6951148. It also states HF 86.5, SC 68.5. Do you carry this part or can you get it? I only need the bare axle, i can transfer my components over. My current axle is bent.