Largest Amount of Drop for Ball Mount in Trailer Hitch

Question

Question:

I need a 20 inch drop? Do you offer ?

asked by: Kc

0

Expert Reply:

The largest drop available is 17-1/2 inches with the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 17-1/2" Drop # 325-GH-318, which has such a significant drop that you will need the Adjustable Stabilizer Bar Kit for Gen-Y Adjustable Ball Mounts with 2" Receivers # 325-GH-0100 to ensure stability.

The second-most drop 16 inches with the BulletProof Hitches Adjustable 2-Ball Mount # HD2016 (2 inch hitch), # HD2516 (2-1/2 inch hitch), or # HD3016 (3 inch hitch).

Those would be the closest available to the 20 inch drop you are looking for. Each would need to be secured to your hitch with a separate pin, and I strongly recommend the Hitch Receiver Lock for 2", 2-1/2", and 3" Hitches # FA86-00-3160 for this.

expert reply by: Kyle S

0

Answer 1

I would be happy to help you improve your view, when towing, on your 2022 Hyundai Palisade. I recommend the CIPA Universal Fit Towing Mirrors item #CM11952-2. These universal-fit mirrors clip onto your factory side-view mirrors to extend your line of…

view full answer...

Answer 2

The BulletProof Hitches replacement ball, part #358REPLACEMENTBALL, is designed specifically to fit BulletProof products. It may fit some others but not the Curt shank you're looking at. You can't see it in the picture on the page (There…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Largest Amount of Drop for Ball Mount in Trailer Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching