Raising a Gooseneck Trailer with Tandem Axles for More Clearance
Question:
On a 3500 lbs tandem axle flat deck goose neck trailer I need more clearance. springs are doule eyes Can I turn the shackels around , so instead of the spring hanging it is now sortoff pushing the trailer up?
asked by: Elbert K
Expert Reply:
If your springs are currently under the axles on your trailer, you can use what is called an over under conversion kit, # K71-385-00. This kit will allow you to move the springs to the top of the axle. For tandem axles, you would need 2 kits. They only fit 3 inch diameter axles. This kit will eliminate the need for welding new spring seats on top of the axle.
I have included a link to a picture of what the new set up will look like.
When lifting the trailer even just a few inches, it changes the center of gravity on the trailer. This could lead to a higher or lower tongue wight and the trailer may be more prone to sway.
Products Referenced in This Question
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Troubleshooting Broken Leaf Spring On a Boat Trailer With Tandem Axles Mounted Individually
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APT3 Review
- Search Results: sp~169275
- Search Results: 169275
- Search Results: 1020
- Q&A: Hanger Kit Recommendation for Leaf Spring e84SR
- Q&A: Why are Trailer Center Hangers of Tandem Axle Hanger Kits Longer
- Q&A: Why is Center Hanger Longer for Tandem Axle Trailer Hanger Kit
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: U-Bolt Plate for 3" Diameter Axle, 1-3/4" Wide Spring - 1/2" Bolts - Galvanized
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Video: Bright Way Push-to-Test Trailer Breakaway Kit Review and Installation 3802308
- Video: Hopkins Trailer Break-Away Kit Installation
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Wiring Diagrams
- Q&A: What is Minimum Clearance Between Gooseneck Trailer Overhang and Truck Bed Rails
- Q&A: What Is Needed For More Clearance Between The Bed Rails And Gooseneck Trailer On A Ford F-150 Truck
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Shortest Diameter Trailer Tire for a 16 inch Rim
- Video: SuperSprings SumoSprings Trailer Helper Springs Review
- Video: Dexter Axle Trailer Axles K71-724-02 Review
- Article: Slipper Spring Trailer Suspension System Review
- Video: Review of etrailer Trailer Leaf Spring Suspension - Spring Mounting Hardware - APT8
- Video: Stability Plus Stabilizer Helper Springs Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs