6,000 lb Disc Brake Kit with 6 Lug Bolt Pattern for Converting Raptor Toy Hauler to Disc Brakes
Question:
Dear Sir, I am converting my 3 axle raptor toyhauler to disc brakes. I have 2 different 6 lugnut drums on now, one has smaller outer bearing 15123, other has larger 14125A. I would like the larger one on disc brake rotors. The spindles are exactly the same. I believe the bigger outer bearing is on 8 lug 7000 lb rotors. Do they make a heavy duty 6000 lb drum with this bearing and not on the rotors. Thank You for Your Time,
asked by: Tom P
Expert Reply:
The bearing difference doesn't mean too much since the spindles are the same so regardless of which axle you decide to put the brake kit on you'll need a 6k rated disc brake kit with an 6 lug bolt pattern. So for that we have the Kodiak brake kit part # K2HR526D which is a fit for your spindles.
This kit does require the bearings part number # 25580 and # 15123 and seal part # RG06-070 which are sold separately.
Or if instead you were wanting a kit that uses an idler hub and a slip-on style rotor we have the part # K71-638-639. Bearings and seal are included with this kit.
I also attached a help article on adding disc brakes to a trailer for you to check out as well.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Dexter Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - E-Coat - 6,000 lbs
- Trailer Brakes
- Disc Brakes
- Standard Grade
- 6 on 5-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 6000 lbs Axle
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 5200 lbs
- 6000 lbs
- Brake Assembly
- 6 on 5-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Q&A: Recommended Components for Off-Road Trailer Similar to Chevy Colorado Wheels
- Article: How to Charge a Dump Trailer Battery
- Q&A: Replacement Trailer Suspension For Single Axle Boat Trailer
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Replacing Parallex 7345 Converter to One that is Compatible with Lithium Batteries
- Q&A: Parts Needed to Install Brake Controller on 2012 Chrysler Town and Country
- Q&A: Recommended Replacement For A WFCO WF-8750P Power Center
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps
- Article: What is Boondocking
- Article: Trailer Tester Battery Replacement for Part Number 8010