Replacement Hubs that Can Fit 2,000 lb Axle with 5 Lug Bolt Pattern
Question:
Will this assembly work on 2000 lb Aluma motorcycle trailer with 13 in wheels and torsion axles? 5 over 4 1/2 with no brakes
asked by: Patrick C
Expert Reply:
The Trailer Idler Hub Assembly # AKIHUB-545-2-LFEZ-1K that you referenced is designed to fit the industry standard 2,000 lb capacity trailer axles with a 5 on 4-1/2 inch bolt pattern like you have so most likely this will fit but you still should probably check. Take the hub off of your current axle and measure the diameter of the spindle where the bearings ride. If this dimension is 1 inch then this is the correct fit.
If for some reason you get a different dimension let me know and I'll see what we might have that could work. The other most likely scenario is that you'd need the part # AKIHUB-545-2-1K which fits spindle diameter of 1.06 inch instead.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Finding Correct Hub Bearings
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-EZ-2K Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-1K
- Video: CE Smith Trailer Hubs and Drums CE13215 Review
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Search Results: 44649
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Shop: Trailer Wiring
- Q&A: Seal With Dimensions to Replace 171255UC
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Shop: Brake Controller
- Article: Most Popular Wheel Bearings
- Search Results: 68149
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Video: Choosing the Right Trailer Wiring
- Q&A: Location of the 40-Amp Fuse for the 2006 Chevrolet Silverado Tow Package
- Search Results: dust cap
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Gooseneck Hitch