Replacement 6-Amp Auto Reset Breaker for Lippert Electric Jack

Question

Question:

I saw few questions about lippert jack. And was wondering if the 6 amp auto reset breaker is all the same ? And where can I buy this in Canada ? None, of the two works. They go dont manually, the test light is good. But nothing seems to go down when I press extract or extend. Thx

asked by: Jean

0

Expert Reply:

The Replacement 6-Amp Auto Reset Breaker for Lippert Components Power Stabilizer Jack # LC134181 are designed for use with the Lippert Electric Stabilizer Jacks that have switches such as the Lippert Components High-Speed Power Stabilizer Jack - Black Waterproof Switch Kit # LC298707. I would not be able to guarantee any other breaker will work with this jack.

If the Lippert jack is what you have, then the reset breaker is exactly what you need; to order one to your home in Canada you can simply go to the Replacement 6-Amp Reset Breaker # LC134181 product page and hit "Add to Cart" and you're set!

expert reply by: Kyle S

0

Al

7/5/2020

Where is pressure switch breaker on 2018 Coachman Pursuit 32WC class A Motorhome to reset?

Reply

Chris R.

7/8/2020

The 6 amp breaker will be in-line with the blue wire from the switch, before the motor. I'm not sure exactly where Coachmen would have mounted the breaker but hopefully you can follow the power wire to its location - if not I would give Coachmen a call directly with your VIN and they should be able to help you out.

Reply

Answer 1

We have actually heard from Lippert about this type of issue and they recommend replacing the 6 amp fuse with a 30 amp fuse. This should resolve the issues you're describing.

view full answer...

Answer 2

I spoke with the folks at Lippert who tell me that your issue sounds like a ground problem. The fact that you can get the motors to operate independently of the coach by directly attaching them to a battery would tend to confirm a poor ground…

view full answer...

Answer 3

It is definitely odd that your jack is only doing this some of the time. Before getting too far into it, I highly suggest checking all the grounds as if one went bad, it can cause any number of weird things to happen. If your grounds all look good,…

view full answer...

Answer 4

The switch should allow power to go through it when the switch is in the "on" position but if it's off and power is going through it that would not be a good sign. But I believe you are asking about it while in the on position. It's…

view full answer...

Answer 5

I really sorry to hear about the trouble you're having with the rear Lippert Stabilizer Jack #LC298707 on your travel trailer. The sporadic operation you're experiencing makes me think there's either an issue with the power…

view full answer...

Answer 6

Probe the wire before and after the breaker with a circuit tester like part #PTW2993 to see if there is power on one side of it but not on the other. That's the easiest way to test it.

view full answer...

Answer 7

A corroded circuit breaker could certainly account for the sporadic operation of your trailer's powered stabilizer jack. So could loose or corroded wiring or connectors. For a new breaker you can use part #LC134181. This is a 6-amp auto-resetting…

view full answer...

Answer 8

There are a couple potential reasons why the back Lippert Power Jack #LC298707 on your trailer won't extend or retract even with the motor running. It's possible that it may have been over-extended or something internally has been stripped or…

view full answer...

Answer 9

If the breaker is resetting that means the motor is wanting to draw too much amperage. Since you've replaced the switch already you've narrowed it down to that. For the replacement motor you'd then want the part #LC352338. This is an…

view full answer...

Answer 10

The 6-Amp Auto Reset Breaker for Lippert Power Stabilizer Jack #LC134181 is self-resetting. It automatically will reset itself after the breaker trips. If the circuit continues to draw more amperage than the breaker is rated for it will constantly…

view full answer...

Answer 11

I spoke with my contact at Lippert and when I described the problem you are having he said you would need to replace the touch pad with part #LC358601 as yours has gone bad.

view full answer...

Answer 12

The battery of the remote #LC358601 is not replaceable. If yours won't take a charge that would indicate it's time for a new one.

view full answer...

Replacement 6-Amp Auto Reset Breaker for Lippert Electric Jack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching