Will the SeaSucker Board Carrier 298-BX1806 Work for a Prone Paddleboard?

Question

Question:

Will the SeaSucker 298-BX1806 work for prone paddleboards? I have a 2015 Toyota Yaris and want to be able to haul a 12-foot prone paddleboard Thanks!!

asked by: Nancy

0

Expert Reply:

The SeaSucker Board Carrier - Vacuum Cup Mounted - 1 Surfboard or Paddleboard # 298-BX1806 will fit paddleboards up to 31 inches wide. If your paddleboard fits that criteria then you will simply need to use the included straps to secure the board for transport.

If you paddleboard is wider than 31", please let me know and I would be happy to help you find a compatible option.

expert reply by: Jason S

0

Answer 1

The best solution available for your 2020 Land Rover Velar is going to be using the SeaSucker Board Carrier #298-BX1806 which will allow you to carry 2 paddle boards or surf boards on the top of your vehicle. The SeaSucker systems are secured to the…

view full answer...

Answer 2

I have a great SeaSucker solution for you to transport your kayak. However, with the SeaSucker Surfboard Carrier - 2 Surfboards or SUPs #298-BX1806, this carrier is not extendable and they are only designed to work with either surfboards or stand-up…

view full answer...

Answer 3

I may have another option for you, but unfortunately there is not a way to carry two 54lb electric bikes on the Malone MicroSport Trailer for 2 Fat Bikes and 2 Kayaks #MPG461KB you were looking at as the included bike racks have a 33lb weight rating…

view full answer...

Answer 4

The bikes would technically fit on the bike carriers of the Malone MicroSport Trailer with Pilot TC ST Aluminum Bike Racks #MPG461KB but the bike carriers would not have the needed capacity for your e-bikes. I also checked all of our roof bike racks…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...