Insulator For MaxxAir Mini Trailer Roof Vent

Question

Question:

When these are installed, are the light blocking pads/cushions used in normal 14inch vents still able to be used?

asked by: Greg S

0

Expert Reply:

The insulators for standard 14x14 roof vents like part # CAM45192 do not fit into the vent opening of the MaxxAir Mini Roof Vent part # MA00-03700. The actual vent opening of the MaxxAir is 10-1/2" so the 14 inch insulator is not going to fit into the opening. The MaxxAir mini Roof Vent fits roofs that are 1" to 4-1/2" thick.

I recommend Camco retractable shade part # CAM42913. The shade attaches to the garnish of the roof vent and extends to 19 inches long to block the light when you are trying to sleep and deflects heat to keep the RV cooler.

expert reply by: Heather A

0

click to enlarge

Answer 1

The shortest garnish pieces that will fit the Ventline E-Z Lift Ventadome Trailer Roof Vent #V3092-601-00 have a 1-1/8" leg. These come in Birch White #VA0445-25 and Polar White #VA0445-33. i have attached a review video for you to reference.

view full answer...

Answer 2

First thing we gotta do is identify the roof vent lid you need. Which to do that you need to look at the hinge setup of the vent and the shape of the lid. I attached a picture that has a few different common styles. If you can check the picture out…

view full answer...

Answer 3

Manufacturers do not list the size of the vents that are used in their RV's so while it is most likely going to fall in the 14" x 14" or 14-1/4" x 14-1/4" category I still recommend measuring the cutout hole size to confirm.…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Insulator For MaxxAir Mini Trailer Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching