Coupler Lock that Will Fit 34 1995 Airstream Excella 1000 Travel Trailer

Question

Question:

Will this work on a 34 1995 Airstream Excella 1000 Travel Trailer?

asked by: Mike

1

Helpful Expert Reply:

If your 1995 Airstream Excella 1000 Travel Trailer has a Bulldog Collar Lok style of coupler on it then yes, the EZ Lock Trailer Coupler Lock # BLTL-20-40D would fit and work well. I pulled up pictures of your trailer and wasn't able to verify that this was the style of coupler that the trailer had, but it's also very common for trailers to have the couplers swapped so you may have a Collar Lok style coupler like what I attached a picture of.

If you have a different style of coupler we have the Fastway lock part # FA86-0015-318 which basically can fit any style of coupler and works really well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

I do have a solution to help with the sag in your tow vehicle as well as with sway control for your enclosed car hauler, but unfortunately 28-1/2" arms on a Weight Distribution (WD) system is the shortest that we have to offer. Most people like…

view full answer...

Answer 2

Thank you so much for your kind words. We strive to give everyone the information they need so they can make the best choices for their vehicles. A factory 7-way (or any 7-way for that matter) does not send braking signals to a trailer's brakes.…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 5

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 6

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Coupler Lock that Will Fit 34 1995 Airstream Excella 1000 Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching