Mounting Hole Dimensions of CE Smith 12" and 13" Plastic Single Axle Fenders
Question:
what is the distance between the mount holes on the bottom of the fender length from inside to inside mounting holes and outside to outside mounting holes can you post picture of bottom or underside of fender with measurements looking to fit on a 2010 karavan boat trailer with 13 inch wheels but believe caravan part was 12 or 13 fender the mount bracket is welded on so distance of mounting holes is required can you do the same on the 13 inch model so I can see what will fit right do you have the 12 inch in black thanks
asked by: Gary
Expert Reply:
I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey # CE19502-2 and the larger 13" Black # CE19503-2. Both options represent the only color available from CE Smith in the respective sizes.
For the 12" # CE19502-2 I measured a distance between the two outside mounting holes, on center, of 31 inches. The distance between the two inside holes is 27 inches. On each mounting surface the holes are spaced apart 4 inches vertically and 2 inches horizontally, on center.
For the 13" # CE19503-2 there is a distance between the two outside mounting on center of 33-3/4 inches and 29-3/4 inches between the two inside holes. The holes on the mounting surfaces are spaced apart 5 inches vertically and 2 inches horizontally, on center.
I have attached images to assist.
Products Referenced in This Question
CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 2
- Trailer Fenders
- Top and Side Step
- 13 Inch Wheels
- 10 Inch Wide
- 40 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- Black
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2
- Trailer Fenders
- Top and Side Step
- 12 Inch Wheels
- 9 Inch Wide
- 37 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- Gray
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 2
- Shop: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 1
- Q&A: CE Smith Single Axle Trailer Fenders CE19503 Mounting Dimensions
- Q&A: Boat Fender Replacement Recommendation for Black Fender and 13" Wheels
- Shop: CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2
- Shop: CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 14" Wheels - Qty 2
- Shop: Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair)
- Video: CE Smith Trailer Fenders - Top and Side Step - CE19503 Review
- Shop: Fulton Single Axle Trailer Fender with Top and Side Steps - White Plastic - 13" Wheels - Qty 1
- Video: CE Smith Trailer Fenders - Top and Side Step - CE19503-2 Review
- Video: CE Smith Trailer Fenders - Top and Side Step - CE19502-2 Review
- Q&A: Plastic Trailer Fender with Bracket Dimensions of Inner 30 inch and Outer 34
- Shop: Single Axle Jeep Style Trailer Fender - Cold Rolled Steel - 8" to 12" Wheels - Qty 1
- Search Results: boat trailer fenders
- Video: Fulton Trailer Fenders - Top and Side Step - F008573 Review
- Q&A: Single Axle Trailer Fender With Brackets 25-1/2" Apart
- Video: Optronics Trailer Lights - Clearance Lights - MCL13A2B Review
- Q&A: Replacement Fenders Needed for a 13" Wheel on a Tracker Trailstar Boat Trailer
- Q&A: Recommended Mounting Bracket For CE Smith Fenders CE19502-2
- Video: CE Smith Trailer Fenders CE26098G-2 Review
- Video: Fulton Trailer Fenders - Top and Side Step - F008572 Review
- Q&A: Will The CE Smith Fenders Come With Mounting Hardware
- Search Results: boat fenders
- Search Results: galvanized bracket
- Search Results: brake lights
- Search Results: guide post
- Search Results: guide post lights
- Search Results: boat trailer brake lights
- Article: How to Choose a Trailer Hitch Coupler
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub