No Driver Turn or Stop Lights on Trailer with 2015 Ram 3500 Tow Vehicle
Question:
I have No driver side turn signal or brake lamp function, I have verified that the trailer lights are all functioning as they should using a friends vehicle. When the trailer is connected to my truck I have all other light functions, all of the running lamps work as well as both tail lamps work, but no brake, turn, or emergency flasher function on the drivers side
asked by: Dave
Expert Reply:
It sounds like the left stop/turn signal fuse is out on your 2015 Ram 3500. In order to check this you will want to pop the hood, find the power distribution center (PDC), and locate the yellow 20 amp F53 fuse which is labeled, "Trailer Tow – Left Turn/Stop Lights". If the fuse is bad then replace it but otherwise you have a wiring issue or error with the body control module (BCM) and you will need to take your truck to a repair center for service.
Product Page this Question was Asked From
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Draw-Tite
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Can You Install a 5th Wheel Hitch On a 2021 GMC Sierra 2500
- Q&A: Can 12 Volt Accessory Circuit of Trailer Wiring Keep 10 Amp Breakaway Battery Topped Off
- Q&A: 4-Way Trailer Connector that has 5 Wires
- Q&A: How to Splice in Replacement 4-Way Trailer End Connector
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Dimensions of the Convert-A-Ball Cushioned Weight Distribution Shank # AMAC1
- Q&A: Distance from Pin Hole Center to End of Bar on Reese Weight Distribution Shank RP63971
- Q&A: Cross Reference of the TruRyde Grease Seal Part # RG06-090
- Article: Trailer Tire Sizing
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Troubleshooting 4 and 5-Way Wiring Installations