Can Two of the Tow-Rax Low-Profile Floor Track be Used for a Winch Mount in a Pickup Truck Bed
Question:
I see the track is rated for 1600lbs of working strength, if I have it installed with through bolts and nuts in the bed of my truck will it support a side pull along its length? I saw someone do this in a video online. The 1200 pound rated winch would be pulling a 500 pound garden tractor up curved ramps, which would spread the load to 250 pounds each track. Just because someone is doing it doesnt mean its safe, Id like to find out what the manufacturer recommends.
asked by: Jeremy
Helpful Expert Reply:
I reached out to my contact at Tow-Rax who confirmed that you can use the Tow-Rax Low-Profile Floor Track # TWSP72TA to install a winch mounting bracket on. The tracks will hold up just fine but you will want to make sure that your mounting hardware can withstand the 500 lbs of weight you plan on pulling up with the winch and that it isn't just mounted to the bed's sheet metal but something more solid.
You will need to get creative with the hardware that you use for the winch mount though as the typical hardware is a tie-down anchor like part # TWSPDSTD225.
Products Referenced in This Question
Tie-Down Anchor for Tow-Rax Low-Profile Floor Track - 1,666 lbs - Qty 1
- Tie Down Anchors
- Track Systems and Anchors
- Trailer Tie-Down Anchors
- O-Track Parts
- 1666 lbs
- O-Track Anchor
- Tow-Rax
more information >
Product Page this Question was Asked From
Tow-Rax Low-Profile Floor Track for Tie-Down Anchors - Aluminum - 6' Long - Machined - Qty 1
- Tie Down Anchors
- Track Systems and Anchors
- Trailer Tie-Down Anchors
- O-Track Parts
- O-Track Bar
- 6 Feet Long
- Tow-Rax
more information >
Continue Researching
- Video: Tow-Rax Tie Down Anchors - Trailer Tie-Down Anchors - TWSP72TA Review
- Video: Review of etrailer E Track - E-Track Rails 4 Pack - e62VR
- Video: Erickson E-Track Strap with Ratchet Review
- Video: etrailer Horizontal E-Track Review
- Shop: Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel - Qty 2
- Shop: Erickson E Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Shop: etrailer Trailer Wheel Lock
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Shop: etrailer Horizontal E Track - Galvanized Steel - 2,000 lbs - 94" Long - Qty 4
- Shop: Erickson E Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs
- Shop: CargoSmart Retractable Ratchet Straps for E-Track or X-Track - 1" x 6' - 500 lbs - Qty 2
- Q&A: Is There a Benefit to Go From 14 inch Trailer Tire to 15 inch Size
- Q&A: Screws or Bolts For etrailer Horizontal E-Track e42VR
- Shop: Brake Controller
- Video: Review of Erickson Tie Down Straps - Roller Idle Ratchet Strap and E-Chock Set - EM58523-09162
- Video: Review of etrailer E-Track - Ratchet Straps - e79HR
- Video: CargoSmart E Track - E-Track - 3481770 Review
- Q&A: Type of Hardware to Use to Install Tow-Rax Low Profile Floor Track
- Q&A: Tow-Rax Compatiblity With Erickson O-Track System
- Q&A: What is Weight Capacity of Tow-Rax Low-Profile Floor Track # TWSP72TA
- Q&A: Can etrailer E-Track System Install on Aluminum Trailer Floor
- Q&A: Is Powder Coated E-Track More Rust Resistant than Galvanized
- Shop: Roof Rack
- Search Results: twsp72ta