Does Aluminum Pole Need to be Used for the Rhino-Rack Universal Load Assist

Question

Question:

Do I have to use the aluminum pole?

asked by: Denis B

0

Expert Reply:

To properly use the Rhino-Rack Universal Load Assist # RR-RUSL yes, you do need to use the aluminum pole.

There are some other options available but they are a little more specific in how you can use them. If you let me know what kayak carrier you are using (if you already have one) and what roof rack system you have I can see if there are any other options available that you may be interested in.

expert reply by: Jon G

0

Answer 1

The Yakima CoreBar crossbars have a hollow inside all the way through which allows the Yakima BoatLoader EVO Telescoping Load Assist #Y04085 to fit into. Since the Yakima JetStream crossbars aren't hollow all the way through we'll need to…

view full answer...

Answer 2

Yes a 60 inch Corebar could fit a Yakima BoatLoader EVO Telescoping Load Assist #Y04085 on either side.

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

The Yakima BoatLoader EVO Telescoping Load Assist - 28" Extension #Y04085 is compatible with only Yakima Corebar or Roundbar roof rack systems. If you are looking for a boat loader that is compatible with the Aero Malone Airflow 2 Crossbars…

view full answer...

Answer 5

I do have a solution for you, but will not involve the Lockrack Loading Bar. You will still have to remove, or adjust the orientation, of the arms for this solution to work, but this method would be your only option. You can use the following items…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Does Aluminum Pole Need to be Used for the Rhino-Rack Universal Load Assist

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching