Will Draw-Tite Class III 2 Inch Hitch # 75118 Fit 2003 Mazda Tribute With Full Size Spare Tire
Question:
Will this hitch fit my 2003 Mazda Tribute V6 4WD with a full size spare tire? Thank you!
asked by: Karl
Expert Reply:
The Draw-Tite Class III 2 Inch Hitch, part # 75118, will fit your 2003 Mazda Tribute V6 4WD. The installation instructions do not mention any interference with the spare tire. I looked up the Mazda Tribute and the spare tire seems to be located in a spare tire well inside the vehicles rear cargo area. It does mention that minor heat shield modification may be required. I am including a link to the installation instructions that will show you where the hitch will be installed and a video link that shows the hitch being installed on a 2004 Mazda Tribute.
If your spare tire is located in a different place other than the factory location, you will want to make sure it does not interfere with the hitch location as shown in the installation instructions.
If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # 989900. It comes with 2 ball mounts, 2 balls, and hitch pin with clip, and a carrying bag.
For trailer wiring, use Tow Ready T-One Wiring Harness, part # 118343. I am including a link to the installation instructions on the wiring harness.
![Jeff D](https://images.etrailer.com/static/images/catg/people/338_tn.jpg)
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can I Carry a Dirt Bike on a 1-1/4 Inch Hitch with a 2-Inch Hitch Adapter on a Honda Accord?
- Q&A: Is a 1-1/4 to 2 Inch Trailer Hitch Receiver Adapter Recommended for Use with a 2 inch Cargo Carrier
- Q&A: Can a 1-1/4 Inch Bike Rack be Used in a 2 Inch Trailer Hitch Receiver
- Q&A: Availability of Pull Wire to Install Draw-Tite Class III Hitch # 75118 on 2003 Ford Escape
- Q&A: Trailer Hitch and Wiring for a 2004 Ford Escape without Factory Tow Package
- Q&A: Trailer Hitch Fit for 2021 Honda CR-V Hybrid
- Q&A: Will Curt Trailer Hitch Receiver Fit 2023 Honda CR-V Touring Hybrid
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Article: My Trailer Hitch Doesn't Fit
- Article: Rust Prevention
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)