Replacement Yakima Two Timer 2 Inch Adapter

Question

Question:

Does this 2inch adapter work on the yakima two-timer?

asked by: Josh

0

Expert Reply:

The correct replacement shank adapter for the Yakima TwoTimer 2 Bike Platform Rack is the Replacement Yakima Two Timer 2 Inch Adapter part # 8880519.

expert reply by: Conner L

0

Answer 1

The Replacement 2" Hitch Adapter Sleeve for Yakima TwoTimer Bike Rack #8880519 is only compatible with the TwoTimer. Yakima did make a replacement 2" adapter for the DoubleDown, but it has been discontinued. Although this will not work for…

view full answer...

Answer 2

If you have a DoubleDown Ace then you would need adapter #Y8890342 and not #Y8890174 which is for the original DoubleDown (the Ace models came later). That is the issue, just need to use the proper adapter for Ace models, #Y8890342.

view full answer...

Answer 3

To find out if the Yakima Replacement Adapter Sleeve #Y8890342 is the correct part for your hitch bike rack you'll first want to try to confirm that the rack is either one of the HighLite or DoubleDown Ace racks. The hole in the rack's shank…

view full answer...

Answer 4

In order to use your Rhode Gear Bike Rack 155974 with a 2" trailer hitch you will need the 1-1/4" to 2" adapter that is included with the Replacement Hardware for Rhode Gear Highway Bike Carriers part #RG890247.

view full answer...

Answer 5

The preferred method to install your Yakima HoldUp Bike Rack #Y02445 with your 2" hitch is to use the Replacement Tongue for Yakima HoldUp Bike Racks #8880580. Since this replaces the shank and isn't using an adapter it will help prevent any…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Replacement Yakima Two Timer 2 Inch Adapter

Product Page this Question was Asked From

Continue Researching