Replacement Ventline Range Hood Fan Blade and Motor Recommendation CC316-1

Question:

The fan blade was gone off of this when we purchased it. What fan motor and blade do we need to replace it with. It is from a 1997 motor home. I am attaching pic of what we have . Thank you.

asked by: Charlie E

Helpful Expert Reply:

The replacement motor you need is the part # BVD0218-00-R for the Ventline Range Hood your RV has. The correct fan blade then is the part # BVD0216-00.

expert reply by: Jameson C

click to enlarge

Harlan S.

5/22/2020

My vent fan does not work (light does work). This is a systems monitor model CC316-1 in a 1995 Jayco Eagle Ford E350 motor home. Could this be a simple problem? Fuse? This worked when we stored the unit last fall. All other systems included in this monitor panel seem to be working. (Water heater, pump, etc.) Thank you for your attention to this question.

Chris R.

5/25/2020

You at least know that the circuit the vent is on is okay (since the other accessories - water heater, pump, etc - on that panel are working properly). So the wiring or power source itself likely isn't a problem. This does point to a problem with the motor. You could try ruling this out by making certain power is getting to the motor by actually testing the wiring just before it when turned on. If you're getting good power there, I do recommend replacing the motor itself with part # BVD0218-00-R. This should get the vent back up and running.

Harlan S.

5/25/2020

@ChrisR Thank you. I checked the fuses. All ok. Rechecked vent fan. It started working. Something must have been loose. Simple fix. Thanks.