bing tracking image
Q & A Icon

How to Pick Out Replacement 4,000 lb Trailer Leaf Spring for Trailer  

Question:

Need to replace travel trailer tandem axle leaf springs. In measuring eye to eye I get 26inch on one and 25 3/4inch on the other I assume because of the equalizer and the weight of the trailer is causing the difference. What size measurement would I use? With it being under load while measuring should I decrease length? They are 3500 axles but would like to increase leafs to a 4000 rating. Would the increase also slightly raise the trailer? Thanks

0

Expert Reply:

When measuring leaf springs you need to take the load off of the trailer so that the spring is not flexed at all to get an accurate measurement. Since typically old springs will stretch a bit you'll take that measurement and look for a replacement that's around 1/8 of an inch shorter with the correct axle capacity.

Most likely the best 4,000 lb leaf spring option we have is the part # e57SR which measures 25-1/4 inches. You should verify the length of your springs unloaded first though.

expert reply by:
0
Jameson C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.