Trouble Removing The Locking Nut On The Yakima ForkLift Roof Mounted Bike Carrier
Question:
I want to remove the bike rack for the winter, but I cant get the locking nut to release. Any suggestions?
asked by: Cary
Expert Reply:
In regards to the Yakima ForkLift Roof Mounted Bike Carrier part # Y02098, you will first want to make sure that the lock core is in the unlocked position. If you can't get the lock core in the unlocked position then please let me know as this is a separate issue. In order to remove the locking nut on the ForkLift you will first want to spray it down with some lubricant and let it sit for around an hour or so.
After the lubricant has had time to soak into the threads you can try to give the bolt and or nut a light tap with a hammer to release some of the dirt. If the tap with a hammer did not allow you to release the locking nut by hand then what you are going to want to do is take a towel, wrap it around the grooved part of the nut, and then take a set of pliers (preferably channel locks) and use them to turn the nut until it breaks loose. Over time dirt and debris can get inside and on the threads which will cause it to become difficult to remove as with any nut and bolt exposed to the elements. In order to prevent this occurring the next time you need to remove the bike rack you can use anti-seize like part # LT37616 on the threads of the bolt.
Products Referenced in This Question
Loctite Anti-Seize Stick - Copper - 0.7-Oz Stick
- Lubricants Sealants Adhesives
- Sealant
- Anti-Seize Sealant
- 0.7 oz
- Loctite
more information >
Product Page this Question was Asked From
Yakima ForkLift Roof Mounted Bike Carrier - Fork Mount
- Roof Bike Racks
- Fork Mount
- 9mm Fork
- Locks Not Included
- Aero Bars
- Factory Bars
- Round Bars
- Square Bars
- Disc Brake Compatible
- Clamp On - Quick
- Black
- Yakima
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: How to Remove the Hitch Pin Bolt Kit from a Yakima BigHorn Bike Rack
- Shop: Replacement Arm End Caps for Yakima SpareTime 2 Bike Carrier - Qty 2
- Shop: Replacement Hardware Bag for Yakima Mako Saddles, LandShark Saddles, HullRaiser or Kayak Stacker
- Shop: Replacement EndCaps for Yakima 86" Long CrossBars - Qty 4
- Shop: Replacement Hardware Kit for Yakima SprocketRocket or Viper Roof Mounted Bike Carrier
- Shop: Replacement Lock Cylinder for Thule Racks and Carriers - N188
- Shop: Replacement Key for Thule Racks and Carriers - N188
- Shop: Roof Rack
- Shop: Custom Fit Kit for Yakima FlushBar Crossbars - Raised, Factory Side Rails - Black
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: 25580
- Shop: Brake Controller
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: How to Pick Out Ball Mount for Honda Odyssey for Additional Rise
- Search Results: dust cap
- Search Results: 44610
- Shop: Fifth Wheel Hitch
- Article: Rooftop Cargo Carriers
- Video: etrailer Class III Trailer Hitch Installation - 2020 Honda Odyssey
on Roof Bike Racks
