Tonneau Cover Recommendation for 2017 Chevy Silverado 6-1/2 foot Bed

Question

Question:

Would a 1500 hard cover tonneau 2010 fit my 2017 Chevy Silverado bed ??

asked by: Claudia

1

Helpful Expert Reply:

There was a big enough generation change for the Chevy Silverados around that the tonneau cover manufacturers had to create new fits. That means that for your 2017 Chevy Silverado 1500 with a 6-1/2 foot bed you'd need a new cover, the Bak Revolver X4s part # BAK52VR.

expert reply by: Jameson C

1

Answer 1

It is; the BAKFlip MX4 Hard Tonneau Cover #BAK48121 that fits your 2015 GMC Sierra 1500 is indeed compatible with the TracRac SR. The reason why is the MX4 installs inside your Sierra's bed rails, leaving the top free, and the TracRac…

view full answer...

Answer 2

Yes a tonneau like the BAK MX4 part #BAK48121 would fit both a 2019 and a 2015 Chevy Silverado and 2019 GMC Sierra 6-1/2 foot bed.

view full answer...

Answer 3

There is a combination of ladder rack and tonneau cover that will fit your 2015 Chevy Silverado 1500 with a 6'6" bed, but the Invis-A-Rack Folding Ladder Rack #DZ951600 is not compatible with the TruXedo Lo Pro Soft Roll-up Tonneau…

view full answer...

Answer 4

Since your BAKFlip MX4 Hard Tonneau Cover #BAK48121 sits inside the bed rails of your pickup we do have some solutions for you. The best option would be to use the Thule TracRac SR which is a sliding rack that mounts on top of your bed rails and has…

view full answer...

Answer 5

I have a great alternative for you. I confirmed with BAK that the reason why the BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl #BAK39121 is listed to fit and the BAK X4 BAK79101 is not listed to fit is because the BAK X4 has been…

view full answer...

Answer 6

The series of BAK hard tonneau covers that is confirmed to be fully compatible with the Thule TracRac SR Sliding Ladder Rack systems is their Revolver series, both the X2 and X4s versions. The BAKFlip you're looking at will technically install…

view full answer...

Answer 7

For your 2004 Nissan Titan, the TS (T-Slot) Rails for Truck Hero Elevate Rack System #TH75FR you mention will work with the BAK Revolver X4s Hard Tonneau Cover #BAK58ZR. From here you can add the Truck Hero Elevate Ladder Rack to your 2004 Nissan…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 10

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 11

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 12

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Tonneau Cover Recommendation for 2017 Chevy Silverado 6-1/2 foot Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching