Selecting Weight Distribution System for Bumper-Pull Horse Trailer
Question:
where can i go to get a weight distribution system added to a horse trailer? I just called uhaul and they dont do this?
asked by: Linda
Expert Reply:
We sell weight distribution/sway control (WD/SC) systems that you can see on the linked page.
The key to selecting the right system is knowing the fully-loaded trailer's actual tongue weight (TW) which can be measured with an etrailer scale # e99044. To the loaded trailer TW you need to add the weight of any cargo in the tow vehicle that sits behind the rear axle, say a generator for instance. These two weights together give you the total TW which is what you need to choose the right system. Ideally your total TW will fall in the middle of the system's operating range. For the Pro Series # PS49901 this ideal TW would be right around 400-lbs.
Using the page I linked for you click on your total TW figure to see suitable systems. For example, if your total TW were 1000-lbs then you could use the Equal-I-zer system # EQ37120ET which is rated for 800- to 1200-lbs of total TW. This system uses a more effective form of sway control than the simple friction bar; it has 4 points of friction to steady the trailer behind you. It also uses frame brackets that are smaller than most which can make them easier to fit on the trailer frame. You can refer to the included photo to see these brackets and to the video on this kit to see more details on its operation.
Products Referenced in This Question
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Determining Trailer Tongue Weight
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is Difference Between Overslung and Underslung Trailer Coupler
- Q&A: Can I Extend My Hitch Without Using TorkLift Hitch and SuperTruss Extension
- Q&A: Recommended TorkLift Hitch and Extension for a 2024 Chevy Silverado 3500
- Q&A: Can the TorkLift Everest Weight Distribution System Be Used w/ a SuperTruss Extension?