Does Drop-In Plastic Bed Liner Require Trimming for 5th Wheel Base Rail Installation
Question:
Will I need to cut my bed liner to install the rail kit or will it bolt on over the top of it?
asked by: William B
1
Helpful Expert Reply:
If your pickup has a drop-in plastic bed liner it will need to be trimmed before you install the Curt 5th Wheel Base Rail Kit # C16420-204. 5th wheel rails must make metal to metal contact with the truck and the drop-in liner will interfere.
Spray-on liners are ok for 5th wheel rail installation since they cannot shift in the bed as a drop-in liner can.
expert reply by:
Adam R
1
Product Page this Question was Asked From
Curt Custom Fifth Wheel Installation Kit for Dodge Ram - Carbide Finish
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Q&A: Replacement Hubs and Brake Assemblies for Dexter Mobile Home Axle and 8-147 Hubs
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Q&A: Recommended RV Exterior Ladder for 22 Ft Thor Four Winds RV
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Q&A: Installation of Hitch on Fifth Wheel Trailer
- Q&A: When Flat Towing a Vehicle How Much Tongue Weight is on the Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure a Trailer Axle
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: RV Cell Boosters, How Do They Work?
- Article: Ram Trailer Tow Prep Package
- Article: Brake Controller Installation: Starting from Scratch