E-Track Wood Beam Socket Has a Bottom

Question

Question:

hi how are you? im just wondering if there is a bottom to the channel for a 2x6 to rest. also what is the height of this part? thanks in advance for any help!

asked by: Jeff

0

Expert Reply:

The E-Track Wood Beam Socket, item # 59149, does have a bottom for a 2 x 6 to rest on , and it is 3-1/2 inches tall.

expert reply by: Andi

0

Answer 1

You can absolutely use the Horizontal E-Tracks #EM59150 that you referenced in your enclosed trailer with 4 of the Wood Beam Sockets #59149 to create a shelf. There isn't any structural benefit to using vertical E-tracks for this application over…

view full answer...

Answer 2

The 5,000 lb capacity on the #TCTSCG70-842-06x1 is per chain. You are correct, the limit would be 10,000 lbs with two of the chains working together like a typical safety chain setup which would be higher than your current 7,600 lb limit. It is…

view full answer...

Answer 3

Since the bracket part #59149 has to be angled into the E-track to install there wouldn't be a way to pull the board and bracket out of a track as one piece since the board would prevent you from getting the right angle.

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

E-Track Wood Beam Socket Has a Bottom

Product Page this Question was Asked From

Continue Researching