How Does Kats Circulating Tank Heater KH13150 Install
Question:
I have the tank heater for 3.0 V6 Sprinter but no instructions, the online instructions are confusing. A picture would be nice. please help.
asked by: Clare J
Expert Reply:
I really wish we had the chance to install the Kat's heater # KH13150 so we could provide an install video or pictures but the best is the following written instructions:
To install the heater you will first need to drain the cooling system. Then cut the lower radiator hose in the middle of the hose and install the 1-1/2" Lower Radiator Hose Connector for Kat's Heaters Circulating Tank Heaters part # KH28115 into the lower hose and secure with two hose clamps.
Locate heater hose along right side bank of engine. Cut 4” out of the center of hose and install the y connector with two hose clamps. Mount tank bracket to sheet metal plate along right side wheel well. Mount as low and close to frame as possible. Mount heater tank in tank bracket and secure. Attach 5/8” green stripe heater hose from lower radiator hose to lower connection on heater tank and secure with hose clamps.
Attach 5/8” green stripe heater hose from y connector to upper connection of heater tank and secure with hose clamps. Attach electrical plug to grille and fasten with wire ties. Fill system with coolant and pressure test for leaks.
Products Referenced in This Question
1-1/2" Lower Radiator Hose Connector for Kat's Heaters Circulating Tank Heaters
- Accessories and Parts
- Vehicle Heaters
- Circulating Heaters
- Hose Connector
- Kats Heaters
more information >
Product Page this Question was Asked From
Kat's Heaters Thermostatically Controlled Circulating Tank Heater - 120V - 1,500 Watts
- Vehicle Heaters
- Circulating Heater
- External Tank
- 120 Volts
- 1500 Watts
- 26 - 40 Quart Cooling System
- Kats Heaters
more information >
Continue Researching
- Shop: Vehicle Engine Heaters
- Shop: Kat's Heaters Thermostatically Controlled Circulating Tank Heater - 120V - 1,500 Watts
- Shop: Replacement Sway Control Tab for Weight Distribution System - Weld On
- Shop: Stromberg Carlson Hitching Post Chain and 7-Way Plug Holder for Trailer Jacks
- Shop: Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black
- Shop: Vinyl Cover with Drawstrings for Stromberg Carlson Electric Jacks
- Shop: Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 14-1/2" x 17-1/2"
- Shop: Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 10-1/2" x 13-3/4"
- Video: Kats Heaters Custom Fit Engine Block Heater Review
- Video: Bearing Repacking and Grease Seals Installation
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Q&A: How To Install the Kat's Heaters Thermostatically Controlled Tank Heater Dodge Sprinter 2500
- Q&A: How to Position the Kats Heaters Thermostatically Controlled Circulating Tank Heater # KH13150
- Q&A: Does Kat's Heaters # KH13150 Include Installation Instructions
- Video: Review of Kats Heaters Vehicle Heaters - Thermostatically Controlled Circulating Tank - KH13100
- Q&A: How Long Does The Kats Heaters Circulating Tank Heater Take To Warm Up
- Q&A: Kat's Heaters Circulating Tank Heater Installation Direction on John Deere 4020 Diesel Tractor
- Video: Review of Kats Heaters Vehicle Heaters - Thermostatically Controlled Circulating Tank - KH13150
- Q&A: Installing Kats Circulating Tank Heater in 2011 Mercedes-Benz Sprinter
- Search Results: hose
- Q&A: Kat's Thermostatically Controlled Circulating Tank Heater Worked Fine 1 Day but then Stopped Working
- Shop: Front Mount Hitch
- Search Results: 16600
- Shop: Trailer Hitch
- Video: Review of Kats Heaters Vehicle Heaters - Engine Block Heater - KH11409
- Video: Curt Trailer Hitch Installation - 2017 Mazda CX-3
- Shop: Headache Rack
- Shop: Base Plate for Tow Bar
- Shop: Truck Bed Sliding Tray
- Shop: Roof Rack