Troubleshooting Trailer Electrical Connector and Light Functions Not Working Correctly
Question:
Trailer electrical connector. Rewired my electrical connector to my trailer the same way it come off, all lites is working and blinking but mute my marker tail lites are not working.
asked by: Jamie
Expert Reply:
It sounds like when you replaced your trailer's connector, the marker lights at the rear of your trailer stopped working. This is most likely due to a ground connection that needs to be improved. Sometimes a ground connection is good enough for most functions but needs to be cleaned up for all lights to function as desired.
I recommend checking your main trailer ground connection to the frame first if you have one and making sure it is bare metal to metal and free of corrosion or debris. Then check your taillights which often have a separate ground wire or ground through your mounting hardware. Then, check the ground connection on those rear marker taillights which most of the time is through the mounting hardware. These connections need to be bare metal to metal as even paint can sometimes hinder the connection needed. If those marker lights aren't working at all, you will want to check for a short using a circuit tester like # PTW2993.
I've attached some articles and a video to assist.
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Article: Troubleshooting Brake Controller Installations
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working