Does the Stromberg Carlson 100 Series 5th Wheel Tailgate Come with All the Hardware for Installation

Question

Question:

Does this tailgate require any additional parts for installation not included in part #VG-97-100?

asked by: Frank

0

Expert Reply:

The Stromberg Carlson 100 Series 5th Wheel Tailgate, # VG-97-100, comes with all of the hardware needed for installation on a 2011 Ford Super Duty. We do have a few other tailgate options for your truck and all of them do come with the necessary parts for installation. I have included a link to them for you.

expert reply by: Michael H

0

Answer 1

Yes, the Stromberg Carlson 100 Series 5th Wheel Tailgate #VG-97-100 is a confirmed fit for your 2010 Ford F-350 and comes with all necessary hardware. As for the back up camera, I recommend the Hopkins Smart Hitch Backup Camera and Hitch Aligner…

view full answer...

Answer 2

The Stromberg Carlson Fifth Wheel Tailgate you referenced, part#VG-97-100 will indeed fit your 2010 Ford F350 SD.

view full answer...

Answer 3

For your 2017 Ram 1500 we have the Hopkins EasyLift part #74211 as a fit which will help make lowering and lifting considerably easier. This will make a 30-40 lb tailgate feel like it weighs or 4 to 7 lbs.

view full answer...

Answer 4

The only replacement tailgate we have for your 2017 Ford F-250 is for 5th wheel and gooseneck towing applications. If you need a 5th wheel/gooseneck tailgate for your truck then the only option I have for you is the Stromberg Carlson 4000 Series 5th…

view full answer...

Answer 5

Most manufacturers are in the process of discontinuing their fifth wheel tailgates with the camera relocation kits due to mechanical issues. Therefore I could not find one that fits your 2017 Ford F-350 Super Duty. The Stromberg Carlson 4000 Series…

view full answer...

Answer 6

The best way to determine if your Explorer is equipped with the tow package is to check with your Ford dealer. They should be able to run the VIN and be able to tell you exactly how the vehicle was equipped. I'm assuming you're needing the…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Does the Stromberg Carlson 100 Series 5th Wheel Tailgate Come with All the Hardware for Installation

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching