Troubleshooting Trailer Wiring Where Running Lights Work Intermittently
Question:
I cant figure out what the problem is for my trailer lights on a gooseneck that I have hooked up to an F350 Powerstroke I turn my lights on my running lights and theres just a little flicker in my lights on my trailer theyre not bright they just flick in and out in and out real dim would that have something to do with my plug on a trailer or my fuses
asked by: Jay M
Expert Reply:
Most likely you have some dirt or corrosion on the pins of your trailer connector which is causing an intermittent connection issue on your trailer wiring. Try inspecting the pins of your trailer connectors and clean as necessary and see if that fixes the issue. I also attached a couple help articles on trailer wiring for you to check out as well.
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: How to Troubleshoot Your RV Air Conditioner
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How to Test Brake Controller without Trailer Connected
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?