Bug Screens for Dometic RV Refrigerator Vents

Question

Question:

I have a Coachmen Clipper 14R with the Dometic RM2351 fridge. I have two vent panels w/ six openings on each panel. Is this the correct screen?

asked by: Mark W

0

Expert Reply:

Yes the Valterra Bug Screens for Dometic RV Refrigerator Vents # A10-1313VP is correct for you. This is a total of 6 screens which are specifically designed to fit Dometic refrigerator vents so this is exactly what you need.

expert reply by: Kyle S

0

Answer 1

Refrigerator vent screens are typically specific to the brand of refrigerator, not to the RV brand. We do offer a set of 3 screens that are for a Norcold RV refrigerator that are 27-1/2 x 1.3 inches as part #A10-1312VP. You can get an idea of what…

view full answer...

Answer 2

We have actually gotten this question before and when we measured the refrigerator vents such as the Camco RV Insect Screens for Dometic Refrigerator Vents #CAM42149 and found they were about 0.1" square. I have added a link to our entire…

view full answer...

Answer 3

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 4

Most critical to trailer tire performance and durability are 1) proper inflation 2) observance of the tire's rated load capacity and 3) observance of the tire's speed rating. If either of these factors is off the mark then the tire will tend…

view full answer...

Answer 5

I wish I could say yes, but as of right now they are not a fit for the 2016 models and we do not have any other suspension enhancement options. If you are trying to fight suspension sag from the tongue weight of a trailer there is a better option. A…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Bug Screens for Dometic RV Refrigerator Vents

Product Page this Question was Asked From

Continue Researching