Recommended Wind Fairing for 46 Inch Crossbars

Question

Question:

Rhino roof rack - I have 46 inch cross bars. Was wondering what size wind fairing to get. 44 or 38

asked by: Los

0

Expert Reply:

The wind fairing you will want to get for your 46 inch Rhino Rack crossbars such as # RRVA118B-2 is going to depend on the distance between the legs on your roof rack.

If you have at least 35-1/2 inches between the legs of your Rhino Rack crossbars you should use the 44 inch Rhino-Rack Fairing for Roof Racks # RRRF3. The other option will be if you have at least 30-1/2 inches between the legs of your roof rack; if so you should use the 38 inch Rhino-Rack Fairing for Roof Racks # RRRF2.

I have added a link to a video review of this wind fairing for you to take a look at.

expert reply by: Kyle S

0

click to enlarge

Answer 1

I recommend using the Rhino-Rack Fairing for Roof Racks - 44" Long #RRRF3. When looking for a fairing, you want to cover as much of the bar as possible while able to attach within the feet/towers of your roof rack. The more air that you…

view full answer...

Answer 2

The instructions included with the Thule RV Wheel Levelers #TH307617 do state that the tires should be 20mm narrower than the width of the levelers for even support across the tires. That being said, these levelers are intended for motorhome use…

view full answer...

Answer 3

I have the correct size for you! Since the front crossbar of the Rhino-Rack ROC25 #RR78TR measures 40-9/16" long, the 50" Fairing #RRRF4 is too long for the setup. The clamps of the 50" will interfere with the feet on the…

view full answer...

Answer 4

We've got a fairing that would work perfectly. For the 49 inch Rhino-Rack square bar roof rack, I'd recommend using the Rhino-Rack 44 inch long fairing, part #RRRF3. If you click the provided link, you can see a product description…

view full answer...

Answer 5

Yes, the Thule SnowPack Ski & Snowboard Carrier #TH7326 is compatible with the roof rack crossbars from Rhino Rack that you referenced and would be a great choice for your son. The parts you need to add that Rhino Rack on his 2014 Chevy…

view full answer...

Answer 6

Using the Inno ski and snowboard carrier #INA951 is going to be your best bet. You would but the 2 boards on one side and the skis on the other. This carrier will fit bars or side rails up to 3-1/4 inches wide/in diameter. For crossbars that run side…

view full answer...

Answer 7

Welcome back! I checked with Rhino Rack and they recommend the 52" Long Fairing for Pioneer Platforms item #RR43251. This will work great with the 60" Long x 54" Wide Pioneer Platform item #RR95TB you ordered last month.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

Unless you went with a metal storage box/toolbox like #UWS01020, which is 48 x 20 x 48 and has a 13.3 cubic foot capacity, the Buyer's Products #3371712250 storage box which is 51-1/2 x 19.5 x 22.5 is the largest plastic box we offer. The UWS box…

view full answer...

Recommended Wind Fairing for 46 Inch Crossbars

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching