Distance from Hitch Pin Hole to Receiver Opening on Draw-Tite Hitch for Toyota Prius

Question

Question:

Is the hole for the safety pin deeper than 1.5 inches into the hitch receiver on the Draw Tite Sport frame. Cant find the spec.

asked by: Jeff

1

Helpful Expert Reply:

Yes. I went out to our warehouse and measured the distance from the center of the hitch pin hole to the receiver tube opening on part # 24966 and it's about 2-1/4 inches.

expert reply by: Charles S

1

click to enlarge

Answer 1

You've done your research! You bring up a lot of interesting contradictions that surround hitches and Toyota Prius. I was actually just following a Prius this morning that had a hitch and bike rack installed which made me think of this as…

view full answer...

Answer 2

The Curt Cam Buckle Stabilizing Strap #18050 is usually used on Class I or Class II hitches to help distribute the weight on them. Since your hitch #C13136 for your 2013 Ausi Q5 is a Class III hitch, then it does not need the stabilizing strap. If…

view full answer...

Answer 3

You do not need to use the Curt Cam Buckle Stabilizing Strap #18050 with the Curt Trailer Hitch Receiver #C11473 that fits your 2017 Toyota Prius. Curt did previously require the use of the strap with accessories like bike racks to maintain the…

view full answer...

Answer 4

The Class II Curt Hitch #C12136 and Class II Draw-Tite Hitch #36493 for your 2016 Subaru Outback Wagon are very similar, but every Class I and Class II and some Class III Curt Hitches require stabilizing straps to be used when towing non trailer…

view full answer...

Answer 5

You will want to use the new hardware that came with your Curt Trailer Hitch Receiver #C11473. The included hardware does not require the OEM washers. Curt determined that the OEM bolts and washers were not long enough to engage all of the threads on…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For your 2020 Prius Prime, there is only one Draw-Tite option and it is the Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #24966. The 3 options you referenced were for the standard Prius not the Prius Prime.

view full answer...

Answer 8

Curt requires the Support Strap #18050 with a number of their hitch receivers like #C11407. The strap isn't required when towing a trailer but only when carrying something like a bike rack or cargo carrier. It's required in order to be…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Distance from Hitch Pin Hole to Receiver Opening on Draw-Tite Hitch for Toyota Prius

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching