Will etrailer.com Trailer Hitch Receiver # E98844 Fit 2019 Toyota Highlander Limited Platinum
Question:
Please verify that this hitch will fit. Thank you
asked by: Warren M
Expert Reply:
Yes, the etrailer.com Trailer Hitch Receiver # E98844 is confirmed to fit your 2019 Toyota Highlander Limited Platinum. This custom Class III hitch will use existing holes in your Highlander's frame for a completely no-drill installation. It will provide you with a 2 inch receiver opening and it features a towing capacity of 6,000 pounds. I also really like the unique matte black finish on this particular model.
I have attached an installation video on the 2018 model Highlander that you can use for reference. The process should be identical on your 2019 model.
If you are looking to do some towing you will also need to add a trailer wiring harness. For this I recommend the Tekonsha T-One Vehicle Wiring Harness # 118449 if you do not have the factory tow package or the Hopkins # HM11141825 if you do have the factory tow package. These are both custom harnesses that install by simply plugging into a built-in plug underneath the spare tire compartment.
I have attached installation videos to assist.
To pull a trailer you will also need a ball mount and hitch ball. The etrailer.com Ball Mount Kit # 989900 is a really nice option that gives you two ball mounts with a different rise and drop (one with a 2-3/4 inch rise or 4 inch drop and another with a 3/4 inch rise or 2 inch drop) along with a 2 inch and 1-7/8 inch hitch ball.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Comparing Equa-Flex and Road Armor Equalizers For 2000 Forest River WIldwood W/ 5200lb Axles
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Tell if 2019 Toyota Highlander Has Factory Tow Package
- Q&A: Replacement 12 inch Brake Assemblies for Dexter 36-89 on Trailer
- Q&A: Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Rent an RV
- Q&A: Can 12 Volt Battery Replace Two 6 Volt Batteries
- Q&A: Using XTRM Universal Sealant to Replace Existing Original XTRM Caulk on Roof
- Article: What Exactly is Tongue Weight?
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)